Chapter 72
	IRON AND STEEL
	Notes.
	1. In this Chapter and, in the case of Notes (d), (e) and (f) throughout the Nomenclature, the following expressions have the meanings hereby assigned to them:
	(a) Pig iron
	Iron-carbon alloys not usefully malleable, containing more than 2 % by weight of carbon and which may contain by weight one or more other elements within the following limits:
	- not more than 10 % of chromium
	- not more than 6 % of manganese
	- not more than 3 % of phosphorus
	- not more than 8 % of silicon
	- a total of not more than 10 % of other elements.
	(b) Spiegeleisen
	Iron-carbon alloys containing by weight more than 6 % but not more than 30% of manganese and otherwise conforming to the specification at (a) above.
	(c) Ferro-alloys
	Alloys in pigs, blocks, lumps or similar primary forms, in forms obtained by continuous casting and also in granular or powder forms, whether or not agglomerated, commonly used as an additive in the manufacture of other alloys or as de- oxidants, de-sulphurising agents or for similar uses in ferrous metallurgy and generally not usefully malleable, containing by weight 4 % or more of the element iron and one or more of the following:
	- more than 10 % of chromium
	- more than 30 % of manganese
	- more than 3 % of phosphorus
	- more than 8 % of silicon
	- a total of more than 10 % of other elements, excluding carbon, subject to a maximum content of 10 % in the case of copper.
	(d) Steel
	Ferrous materials other than those of heading 72.03 which (with the exception of certain types produced in the form of castings) are usefully malleable and which contain by weight 2 % or less of carbon. However, chromium steels may contain higher proportions of carbon.
	(e) Stainless steel
	Alloy steels containing, by weight, 1.2 % or less of carbon and 10.5 % or more of chromium, with or without other elements.
	(f) Other alloy steel
	Steels not complying with the definition of stainless steel and containing by weight one or more of the following elements in the proportion shown:
	- 0.3 % or more of aluminium
	- 0.0008 % or more of boron
	- 0.3 % or more of chromium
	- 0.3 % or more of cobalt
	- 0.4 % or more of copper
	- 0.4 % or more of lead
	- 1.65 % or more of manganese
	- 0.08 % or more of molybdenum
	- 0.3 % or more of nickel
	- 0.06 % or more of niobium
	- 0.6 % or more of silicon
	- 0.05 % or more of titanium
	- 0.3 % or more of tungsten (wolfram)
	- 0.1 % or more of vanadium
	- 0.05 % or more of zirconium
	- 0.1 % or more of other elements (except sulphur, phosphorus, carbon and nitrogen), taken separately.
	(g) Remelting scrap ingots of iron or steel
	Products roughly cast in the form of ingots without feeder-heads or hot tops, or of pigs, having obvious surface faults and not complying with the chemical composition of pig iron, spiegeleisen or ferro-alloys.
	(h) Granules
	Products of which less than 90 % by weight passes through a sieve with a mesh aperture of 1 mm and of which 90 % or more by weight passes through a sieve with a mesh aperture of 5 mm.
	(ij) Semi-finished products
	Continuous cast products of solid section, whether or not subjected to primary hot-rolling; and
	Other products of solid section, which have not been further worked than subjected to primary hot-rolling or roughly shaped by forging, including blanks for angles, shapes or sections.
	These products are not presented in coils.
	(k) Flat-rolled products
	Rolled products of solid rectangular (other than square) cross-section, which do not conform to the definition at (ij) above in the form of:
	- coils of successively superimposed layers, or
	- straight lengths, which if of a thickness less than 4.75 mm are of a width measuring at least ten times the thickness or if of a thickness of 4.75 mm or more are of a width which exceeds 150 mm and measures at least twice the thickness.
	Flat-rolled products include those with patterns in relief derived directly from rolling (for example, grooves, ribs, chequers, tears, buttons, lozenges) and those which have been perforated, corrugated or polished, provided that they do not thereby assume the character of articles or products of other headings.
	Flat-rolled products of a shape other than rectangular or square, of any size, are to be classified as products of a width of 600 mm or more, provided that they do not assume the character of articles or products of other headings.
	(l) Bars and rods, hot-rolled, in irregularly wound coils
	Hot-rolled products in irregularly wound coils, which have a solid cross-section in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods).
	(m) Other bars and rods
	Products which do not conform to any of the definitions at (ij), (k) or (l) above or to the definition of wire, which have a uniform solid cross-section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles or other convex polygons (including “flattened circles” and “modified rectangles”, of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). These products may:
	- have indentations, ribs, grooves or other deformations produced during the rolling process (reinforcing bars and rods);
	- be twisted after rolling.
	(n) Angles, shapes and sections
	Products having a uniform solid cross-section along their whole length which do not conform to any of the definitions at (ij), (k), (l) or (m) above or to the definition of wire.
	Chapter 72 does not include products of heading 73.01 or 73.02.
	(o) Wire
	Cold-formed products in coils, of any uniform solid cross-section along their whole length, which do not conform to the definition of flat-rolled products.
	(p) Hollow drill bars and rods
	Hollow bars and rods of any cross-section, suitable for drills, of which the greatest external dimension of the cross-section exceeds 15 mm but does not exceed 52 mm, and of which the greatest internal dimension does not exceed one half of the greatest external dimension. Hollow bars and rods of iron or steel not conforming to this definition are to be classified in heading 73.04.
	2. Ferrous metals clad with another ferrous metal are to be classified as products of the ferrous metal predominating by weight.
	3. Iron or steel products obtained by electrolytic deposition, by pressure casting or by sintering are to be classified, according to their form, their composition and their appearance, in the headings of this Chapter appropriate to similar hot-rolled products.
	Subheading Notes.
	1. In this Chapter the following expressions have the meanings hereby assigned to them:
	(a) Alloy pig iron
	Pig iron containing, by weight, one or more of the following elements in the specified proportions:
	- more than 0.2 % of chromium
	- more than 0.3 % of copper
	- more than 0.3 % of nickel
	- more than 0.1 % of any of the following elements: aluminium, molybdenum, titanium, tungsten (wolfram), vanadium.
	(b) Non-alloy free-cutting steel
	Non-alloy steel containing, by weight, one or more of the following elements in the specified proportions:
	- 0.08 % or more of sulphur
	- 0.1 % or more of lead
	- more than 0.05 % of selenium
	- more than 0.01 % of tellurium
	- more than 0.05 % of bismuth.
	(c) Silicon-electrical steel
	Alloy steels containing by weight at least 0.6 % but not more than 6 % of silicon and not more than 0.08 % of carbon. They may also contain by weight not more than 1 % of aluminium but no other element in a proportion that would give the steel the characteristics of another alloy steel.
	(d) High speed steel
	Alloy steels containing, with or without other elements, at least two of the three elements molybdenum, tungsten and vanadium with a combined content by weight of 7 % or more, 0.6 % or more of carbon and 3 to 6 % of chromium.
	(e) Silico-manganese steel
	Alloy steels containing by weight:
	- not more than 0.7 % of carbon,
	- 0.5 % or more but not more than 1.9 % of manganese, and
	- 0.6 % or more but not more than 2.3 % of silicon, but no other element in a proportion that would give the steel the characteristics of another alloy steel.
	2. For the classification of ferro-alloys in the subheadings of heading 72.02 the following rule should be observed:
	A ferro-alloy is considered as binary and classified under the relevant subheading (if it exists) if only one of the alloy elements exceeds the minimum percentage laid down in Chapter Note 1 (c); by analogy, it is considered respectively as ternary or quaternary if two or three alloy elements exceed the minimum percentage.
	For the application of this rule the unspecified “other elements” referred to in Chapter Note 1 (c) must each exceed 10 % by weight.
	Sub-Chapter I
	PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER FORM
HS code	Product description in English
7201	Pig iron and, spiegeleisen in pigs, blocks or other primary forms.
72011000	- Non-alloy pig iron containing by weight 0.5 % or less of phosphorus
72012000	- Non-alloy pig iron containing by weight more than 0.5 % of phosphorus
72015000	- Alloy pig iron; spiegeleisen
7202	Ferro-alloys.
	- Ferro-manganese:
72021100	- - Containing by weight more than 2 % of carbon
72021900	- - Other
	- Ferro-silicon:
72022100	- - Containing by weight more than 55 % of silicon
72022900	- - Other
72023000	- Ferro-silico-manganese
	- Ferro-chromium:
72024100	- - Containing by weight more than 4 % of carbon
72024900	- - Other
72025000	- Ferro-silico-chromium
72026000	- Ferro-nickel
72027000	- Ferro-molybdenum
72028000	- Ferro-tungsten and ferro-silico-tungsten
	- Other:
72029100	- - Ferro-titanium and ferro-silico-titanium
72029200	- - Ferro-vanadium
72029300	- - Ferro-niobium
72029900	- - Other
7203	Ferrous products obtained by direct reduction of iron ore and other spongy ferrous products, in lumps, pellets or similar forms; iron having a minimum purity by weight of 99.94 %, in lumps, pellets or similar forms.
72031000	- Ferrous products obtained by direct reduction of iron ore
72039000	- Other
7204	Ferrous waste and scrap; remelting scrap ingots of iron or steel.
72041000	- Waste and scrap of cast iron
	- Waste and scrap of alloy steel:
72042100	- - Of stainless steel
72042900	- - Other
72043000	- Waste and scrap of tinned iron or steel
	- Other waste and scrap:
72044100	- - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
72044900	- - Other
72045000	- Remelting scrap ingots
7205	Granules and powders, of pig iron, spiegeleisen, iron or steel.
72051000	- Granules
	- Powders:
72052100	- - Of alloy steel
72052900	- - Other
	Sub-Chapter II
	IRON AND NON-ALLOY STEEL
7206	Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 72.03).
720610	- Ingots:
72061010	- - Containing by weight more than 0.6 % of carbon
72061090	- - Other
72069000	- Other
7207	Semi-finished products of iron or non-alloy steel.
	- Containing by weight less than 0.25 % of carbon:
72071100	- - Of rectangular (including square) cross-section, the width measuring less than twice the thickness
720712	- - Other, of rectangular (other than square) cross- section:
72071210	- - - Slabs
72071290	- - - Other
72071900	- - Other
720720	- Containing by weight 0.25 % or more of carbon:
	- - Containing by weight less than 0.6 % of carbon:
72072010	- - - Slabs
	- - - Other:
72072021	- - - - Blocks roughly shaped by forging; sheet bars
72072029	- - - - Other
	- - Other:
72072091	- - - Slabs
	- - - Other:
72072092	- - - - Blocks roughly shaped by forging; sheet bars
72072099	- - - - Other
7208	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated.
72081000	- In coils, not further worked than hot-rolled, with patterns in relief
	- Other, in coils, not further worked than hot- rolled, pickled:
72082500	- - Of a thickness of 4.75 mm or more
72082600	- - Of a thickness of 3 mm or more but less than 4.75 mm
720827	- - Of a thickness of less than 3 mm:
	- - - Of a thickness of less than 2 mm:
72082711	- - - - Containing by weight 0.6 % or more of carbon
72082719	- - - - Other
	- - - Other:
72082791	- - - - Containing by weight 0.6 % or more of carbon
72082799	- - - - Other
	- Other, in coils, not further worked than hot- rolled:
72083600	- - Of a thickness exceeding 10 mm
72083700	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm
72083800	- - Of a thickness of 3 mm or more but less than 4.75 mm
720839	- - Of a thickness of less than 3 mm:
72083910	- - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less
72083990	- - - Other
72084000	- Not in coils, not further worked than hot-rolled, with patterns in relief
	- Other, not in coils, not further worked than hot- rolled:
72085100	- - Of a thickness exceeding 10 mm
72085200	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm
72085300	- - Of a thickness of 3 mm or more but less than 4.75 mm
720854	- - Of a thickness of less than 3 mm:
72085410	- - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less
72085490	- - - Other
720890	- Other:
72089010	- - Corrugated
72089020	- - Other, containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less
72089090	- - Other
7209	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold- reduced), not clad, plated or coated.
	- In coils, not further worked than cold-rolled (cold-reduced):
72091500	- - Of a thickness of 3 mm or more
720916	- - Of a thickness exceeding 1 mm but less than 3 mm:
72091610	- - - Of a width not exceeding 1,250 mm
72091690	- - - Other
720917	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
72091710	- - - Of a width not exceeding 1,250 mm
72091790	- - - Other
720918	- - Of a thickness of less than 0.5 mm:
72091810	- - - Tin-mill blackplate
	- - - Other:
72091891	- - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less
72091899	- - - - Other
	- Not in coils, not further worked than cold-rolled (cold-reduced):
72092500	- - Of a thickness of 3 mm or more
720926	- - Of a thickness exceeding 1 mm but less than 3 mm:
72092610	- - - Of a width not exceeding 1,250 mm
72092690	- - - Other
720927	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm:
72092710	- - - Of a width not exceeding 1,250 mm
72092790	- - - Other
720928	- - Of a thickness of less than 0.5 mm:
72092810	- - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less
72092890	- - - Other
720990	- Other:
72099010	- - Corrugated
72099090	- - Other
7210	Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated.
	- Plated or coated with tin:
721011	- - Of a thickness of 0.5 mm or more:
72101110	- - - Containing by weight 0.6 % or more of carbon
72101190	- - - Other
721012	- - Of a thickness of less than 0.5 mm:
72101210	- - - Containing by weight 0.6 % or more of carbon
72101290	- - - Other
721020	- Plated or coated with lead, including terne-plate:
72102010	- - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less
72102090	- - Other
721030	- Electrolytically plated or coated with zinc:
	- - Containing by weight less than 0.6 % of carbon:
72103011	- - - Of a thickness not exceeding 1.2 mm
72103012	- - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
72103019	- - - Other
	- - Other:
72103091	- - - Of a thickness not exceeding 1.2 mm
72103099	- - - Other
	- Otherwise plated or coated with zinc:
721041	- - Corrugated:
	- - - Containing by weight less than 0.6 % of carbon:
72104111	- - - - Of a thickness not exceeding 1.2 mm
72104112	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
72104119	- - - - Other
	- - - Other:
72104191	- - - - Of a thickness not exceeding 1.2 mm
72104199	- - - - Other
721049	- - Other:
	- - - Containing by weight less than 0.6 % of carbon:
72104911	- - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04 % of carbon and of a thickness not exceeding 1.2 mm
72104912	- - - - Other, of a thickness not exceeding 1.2 mm
72104913	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
72104919	- - - - Other
	- - - Other:
72104991	- - - - Of a thickness not exceeding 1.2 mm
72104999	- - - - Other
72105000	- Plated or coated with chromium oxides or with chromium and chromium oxides
	- Plated or coated with aluminium:
721061	- - Plated or coated with aluminium-zinc alloys:
	- - - Containing by weight less than 0.6 % of carbon:
72106111	- - - - Of a thickness not exceeding 1.2 mm
72106112	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
72106119	- - - - Other
	- - - Other:
72106191	- - - - Of a thickness not exceeding 1.2 mm
72106192	- - - - Other, corrugated
72106199	- - - - Other
721069	- - Other:
	- - - Containing by weight less than 0.6 % of carbon:
72106911	- - - - Of a thickness not exceeding 1.2 mm
72106912	- - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm
72106919	- - - - Other
	- - - Other:
72106991	- - - - Of a thickness not exceeding 1.2 mm
72106999	- - - - Other
721070	- Painted, varnished or coated with plastics:
	- - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less:
72107011	- - - Painted
72107019	- - - Other
	- - Other:
72107091	- - - Painted
72107099	- - - Other
721090	- Other:
72109010	- - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less
72109090	- - Other
7211	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated.
	- Not further worked than hot-rolled:
721113	- - Rolled on four faces or in a closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief:
	- - - Containing by weight less than 0.6 % of carbon:
72111311	- - - - Hoop and strip; universal plates
72111312	- - - - Corrugated
72111319	- - - - Other
	- - - Other:
72111391	- - - - Hoop and strip; universal plates
72111399	- - - - Other
721114	- - Other, of a thickness of 4.75 mm or more:
	- - - Containing by weight less than 0.6 % of carbon:
72111413	- - - - Hoop and strip; universal plates
72111414	- - - - Corrugated
72111415	- - - - Coils for re-rolling
72111419	- - - - Other
	- - - Other:
72111491	- - - - Hoop and strip; universal plates
72111492	- - - - Corrugated
72111493	- - - - Coils for re-rolling
72111499	- - - - Other
721119	- - Other:
	- - - Containing by weight less than 0.6 % of carbon:
72111913	- - - - Hoop and strip; universal plates
72111914	- - - - Corrugated
72111915	- - - - Coils for re-rolling
72111919	- - - - Other
	- - - Other:
72111991	- - - - Hoop and strip; universal plates
72111992	- - - - Corrugated
72111993	- - - - Coils for re-rolling
72111999	- - - - Other
	- Not further worked than cold-rolled (cold- reduced):
721123	- - Containing by weight less than 0.25 % of carbon:
72112310	- - - Corrugated
72112320	- - - Hoop and strip, of a width not exceeding 400 mm
72112330	- - - Other, of a thickness of 0.17 mm or less
72112390	- - - Other
721129	- - Other:
72112910	- - - Corrugated
72112920	- - - Hoop and strip, of a width not exceeding 400 mm
72112930	- - - Other, of a thickness of 0.17 mm or less
72112990	- - - Other
721190	- Other:
	- - Containing by weight less than 0.6 % of carbon:
72119011	- - - Hoop and strip, of a width not exceeding 25 mm
72119012	- - - Hoop and strip, of a width exceeding 400 mm
72119013	- - - Corrugated
72119014	- - - Other, of a thickness of 0.17 mm or less
72119019	- - - Other
	- - Other:
72119091	- - - Of a thickness of 0.17 mm or less
72119099	- - - Other
7212	Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated.
721210	- Plated or coated with tin:
	- - Containing by weight less than 0.6 % of carbon:
72121011	- - - Hoop and strip, of a width not exceeding 25 mm
72121013	- - - Hoop and strip, of a width exceeding 25 mm but not exceeding 400 mm
72121019	- - - Other
	- - Other:
72121092	- - - Hoop and strip, of a width not exceeding 25 mm
72121093	- - - Hoop and strip, of a width exceeding 25 mm but not exceeding 400 mm
72121099	- - - Other
721220	- Electrolytically plated or coated with zinc:
72122010	- - Hoop and strip, of a width not exceeding 400 mm
72122020	- - Other, containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less
72122090	- - Other
721230	- Otherwise plated or coated with zinc:
	- - Containing by weight less than 0.6 % of carbon:
72123011	- - - Hoop and strip, of a width not exceeding 25 mm
72123012	- - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm
72123013	- - - Other, of a thickness of 1.5 mm or less
72123014	- - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04 % of carbon
72123019	- - - Other
72123090	- - Other
721240	- Painted, varnished or coated with plastics:
	- - Containing by weight less than 0.6 % of carbon:
72124011	- - - Hoop and strip, of a width not exceeding 400 mm
72124012	- - - Other hoop and strip
72124019	- - - Other
	- - Other:
72124091	- - - Hoop and strip, of a width not exceeding 400 mm
72124092	- - - Other hoop and strip; universal plates
72124099	- - - Other
721250	- Otherwise plated or coated:
	- - Plated or coated with chromium oxides or with chromium and chromium oxides:
72125013	- - - Hoop and strip, of a width not exceeding 25 mm
72125014	- - - Other hoop and strip; universal plates
72125019	- - - Other
	- - Plated or coated with aluminium-zinc alloys:
72125023	- - - Hoop and strip, of a width not exceeding 25 mm
72125024	- - - Other hoop and strip; universal plates
72125029	- - - Other
	- - Other:
72125093	- - - Hoop and strip, of a width not exceeding 25 mm
72125094	- - - Other hoop and strip; universal plates
72125099	- - - Other
721260	- Clad:
	- - Containing by weight less than 0.6 % of carbon:
72126011	- - - Hoop and strip
72126012	- - - Other, of a thickness of 1.5 mm or less
72126019	- - - Other
	- - Other:
72126091	- - - Hoop and strip
72126099	- - - Other
7213	Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel.
721310	- Containing indentations, ribs, grooves or other deformations produced during the rolling process:
72131010	- - Of circular cross-section measuring not exceeding 50 mm in diameter
72131090	- - Other
72132000	- Other, of free-cutting steel
	- Other:
721391	- - Of circular cross-section measuring less than 14 mm in diameter:
72139110	- - - Of a kind used for producing soldering sticks
72139120	- - - Of a kind used for concrete reinforcement (rebars)
72139190	- - - Other
721399	- - Other:
72139910	- - - Of a kind used for producing soldering sticks
72139920	- - - Of a kind used for concrete reinforcement (rebars)
72139990	- - - Other
7214	Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot- drawn or hot-extructed, but including those twisted after rolling.
721410	- Forged:
	- - Containing by weight less than 0.6 % of carbon:
72141011	- - - Of circular cross-section
72141019	- - - Other
	- - Other:
72141021	- - - Of circular cross-section
72141029	- - - Other
721420	- Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling:
	- - Containing by weight less than 0.6 % of carbon:
	- - - Of circular cross-section:
72142031	- - - - Of a kind used for concrete reinforcement (rebars)
72142039	- - - - Other
	- - - Other:
72142041	- - - - Of a kind used for concrete reinforcement (rebars)
72142049	- - - - Other
	- - Other:
	- - - Of circular cross-section:
72142051	- - - - Of a kind used for concrete reinforcement (rebars)
72142059	- - - - Other
	- - - Other:
72142061	- - - - Of a kind used for concrete reinforcement (rebars)
72142069	- - - - Other
721430	- Other, of free-cutting steel:
72143010	- - Of circular cross section
72143090	- - Other
	- Other:
721491	- - Of rectangular (other than square) cross-section:
	- - - Containing by weight less than 0.6 % of carbon:
72149111	- - - - Containing by weight 0.38 % or more of carbon and less than 1.15 % of manganese
72149112	- - - - Containing by weight 0.17 % or more but not more than 0.46 % of carbon and 1.2 % or more but less than 1.65 % of manganese
72149119	- - - - Other
	- - - Containing by weight 0.6 % or more of carbon:
72149121	- - - - Containing by weight less than 1.15 % of manganese
72149129	- - - - Other
721499	- - Other:
	- - - Containing by weight 0.6 % or more of carbon, other than of circular cross-section:
72149911	- - - - Containing by weight less than 1.15 % of manganese
72149919	- - - - Other
	- - - Other:
72149991	- - - - Containing by weight less than 0.38 % of carbon, not more than 0.05 % of phosphorus and not more than 0.05 % of sulphur
72149992	- - - - Containing by weight 0.38 % or more of carbon and less than 1.15 % of manganese
72149993	- - - - Containing by weight 0.17 % or more but less than 0.46% of carbon and 1.2 % or more but less than 1.65 % of manganese
72149999	- - - - Other
7215	Other bars and rods of iron or non-alloy steel.
721510	- Of free-cutting steel, not further worked than cold-formed or cold-finished:
72151010	- - Of circular cross-section
72151090	- - Other
721550	- Other, not further worked than cold-formed or cold-finished:
72155010	- - Containing by weight 0.6 % or more of carbon, other than of circular cross-section
	- - Other:
72155091	- - - Of a kind used for concrete reinforcement (rebars)
72155099	- - - Other
721590	- Other:
72159010	- - Of a kind used for concrete reinforcement (rebars)
72159090	- - Other
7216	Angles, shapes and sections of iron or non-alloy steel.
72161000	- U, I or H sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of less than 80 mm
	- L or T sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of less than 80 mm:
721621	- - L sections:
72162110	- - - Containing by weight less than 0.6 % of carbon
72162190	- - - Other
72162200	- - T sections
	- U, I or H sections, not further worked than hot- rolled, hot-drawn or extruded of a height of 80 mm or more:
721631	- - U sections:
72163110	- - - Containing by weight 0.6 % or more of carbon
72163190	- - - Other
721632	- - I sections:
72163210	- - - Of a thickness of 5 mm or less
72163290	- - - Other
721633	- - H sections:
	- - - Containing by weight less than 0.6 % of carbon:
72163311	- - - - Thickness of the flange not less than thickness of the web
72163319	- - - - Other
72163390	- - - Other
721640	- L or T sections, not further worked than hot- rolled, hot-drawn or extruded, of a height of 80 mm or more:
72164010	- - Containing by weight 0.6 % or more of carbon
72164090	- - Other
721650	- Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded:
	- - Of a height of less than 80 mm:
72165011	- - - Containing by weight 0.6 % or more of carbon
72165019	- - - Other
	- - Other:
72165091	- - - Containing by weight 0.6 % or more of carbon
72165099	- - - Other
	- Angles, shapes and sections, not further worked than cold-formed or cold-finished:
72166100	- - Obtained from flat-rolled products
72166900	- - Other
	- Other:
721691	- - Cold-formed or cold-finished from flat-rolled products:
72169110	- - - Angles, other than slotted angles, containing by weight 0.6% or more of carbon
72169190	- - - Other
72169900	- - Other
7217	Wire of iron or non-alloy steel.
721710	- Not plated or coated, whether or not polished:
72171010	- - Containing by weight less than 0.25 % of carbon
	- - Containing by weight 0.25 % or more but less than 0.6 % of carbon:
72171022	- - - Bead wire; reed wire; wire of a kind used for making strands for prestressing concrete; free- cutting steel wire
72171029	- - - Other
	- - Containing by weight 0.6 % or more of carbon:
72171032	- - - Spokes wire; bead wire; reed wire; free- cutting steel wire
72171033	- - - Wire of a kind used for making strands for prestressing concrete
72171039	- - - Other
721720	- Plated or coated with zinc:
72172010	- - Containing by weight less than 0.25 % carbon
72172020	- - Containing by weight 0.25 % or more but less than 0.45 % of carbon
	- - Containing by weight 0.45 % or more of carbon:
72172091	- - - Steel core wire of a kind used for steel reinforced aluminium conductors (ACSR)
72172099	- - - Other
721730	- Plated or coated with other base metals:
	- - Containing by weight less than 0.25 % of carbon:
72173011	- - - Plated or coated with tin
72173019	- - - Other
	- - Containing by weight 0.25 % or more of carbon but less than 0.6 % of carbon:
72173021	- - - Plated or coated with tin
72173029	- - - Other
	- - Containing by weight 0.6 % or more of carbon:
72173033	- - - Brass coated steel wire of a kind used in the manufacture of pneumatic rubber tyres
72173034	- - - Other copper alloy coated steel wire of a kind used in the manufacture of pneumatic rubber tyres
72173035	- - - Other, plated or coated with tin
72173039	- - - Other
721790	- Other:
72179010	- - Containing by weight less than 0.25 % of carbon
72179090	- - Other
	Sub-Chapter III
	STAINLESS STEEL
7218	Stainless steel in ingots or other primary forms; semi- finished products of stainless steel.
72181000	- Ingots and other primary forms
	- Other:
72189100	- - Of rectangular (other than square) cross-section
72189900	- - Other
7219	Flat-rolled products of stainless steel, of a width of 600 mm or more.
	- Not further worked than hot-rolled, in coils:
72191100	- - Of a thickness exceeding 10 mm
72191200	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm
72191300	- - Of a thickness of 3 mm or more but less than 4.75 mm
72191400	- - Of a thickness of less than 3 mm
	- Not further worked than hot-rolled, not in coils:
72192100	- - Of a thickness exceeding 10 mm
72192200	- - Of a thickness of 4.75 mm or more but not exceeding 10 mm
72192300	- - Of a thickness of 3 mm or more but less than 4.75 mm
72192400	- - Of a thickness of less than 3 mm
	- Not further worked than cold-rolled (cold- reduced):
72193100	- - Of a thickness of 4.75 mm or more
72193200	- - Of a thickness of 3 mm or more but less than 4.75 mm
72193300	- - Of a thickness exceeding 1 mm but less than 3 mm
72193400	- - Of a thickness of 0.5 mm or more but not exceeding 1 mm
72193500	- - Of a thickness of less than 0.5 mm
72199000	- Other
7220	Flat-rolled products of stainless steel, of a width of less than 600 mm.
	- Not further worked than hot-rolled:
722011	- - Of a thickness of 4.75 mm or more:
72201110	- - - Hoop and strip, of a width not exceeding 400 mm
72201190	- - - Other
722012	- - Of a thickness of less than 4.75 mm:
72201210	- - - Hoop and strip, of a width not exceeding 400 mm
72201290	- - - Other
722020	- Not further worked than cold-rolled (cold- reduced):
72202010	- - Hoop and strip, of a width not exceeding 400 mm
72202090	- - Other
722090	- Other:
72209010	- - Hoop and strip, of a width not exceeding 400 mm
72209090	- - Other
72210000	Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.
7222	Other bars and rods of stainless steel; angles, shapes and sections of stainless steel.
	- Bars and rods, not further worked than hot- rolled, hot-drawn or extruded:
72221100	- - Of circular cross-section
72221900	- - Other
722220	- Bars and rods, not further worked than cold- formed or cold- finished:
72222010	- - Of circular cross-section
72222090	- - Other
722230	- Other bars and rods:
72223010	- - Of circular cross-section
72223090	- - Other
722240	- Angles, shapes and sections:
72224010	- - Not further worked than hot-rolled, hot-drawn or extruded
72224090	- - Other
7223	Wire of stainless steel.
72230010	- Of cross-section exceeding 13 mm
72230090	- Other
	Sub-Chapter IV
	OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF ALLOY OR NON- ALLOY STEEL
7224	Other alloy steel in ingots or other primary forms; semi- finished products of other alloy steel.
72241000	- Ingots and other primary forms
72249000	- Other
7225	Flat-rolled products of other alloy steel, of a width of 600 mm or more.
	- Of silicon-electrical steel:
72251100	- - Grain-oriented
72251900	- - Other
722530	- Other, not further worked than hot-rolled, in coils:
72253010	- - Of high speed steel
72253090	- - Other
722540	- Other, not further worked than hot-rolled, not in coils:
72254010	- - Of high speed steel
72254090	- - Other
722550	- Other, not further worked than cold-rolled (cold- reduced):
72255010	- - Of high speed steel
72255090	- - Other
	- Other:
722591	- - Electrolytically plated or coated with zinc:
72259110	- - - Of high speed steel
72259190	- - - Other
722592	- - Otherwise plated or coated with zinc:
72259210	- - - Of high speed steel
72259290	- - - Other
722599	- - Other:
72259910	- - - Of high speed steel
72259990	- - - Other
7226	Flat-rolled products of other alloy steel, of a width of less than 600 mm.
	- Of silicon-electrical steel:
722611	- - Grain-oriented:
72261110	- - - Hoop and strip, of a width not exceeding 400 mm
72261190	- - - Other
722619	- - Other:
72261910	- - - Hoop and strip, of a width not exceeding 400 mm
72261990	- - - Other
722620	- Of high speed steel:
72262010	- - Hoop and strip, of a width not exceeding 400 mm
72262090	- - Other
	- Other:
722691	- - Not further worked than hot-rolled:
72269110	- - - Hoop and strip, of a width not exceeding 400 mm
72269190	- - - Other
722692	- - Not further worked than cold-rolled (cold- reduced):
72269210	- - - Hoop and strip, of a width not exceeding 400 mm
72269290	- - - Other
722699	- - Other:
	- - - Hoop and strip, of a width not exceeding 400 mm:
72269911	- - - - Plated or coated with zinc
72269919	- - - - Other
	- - - Other:
72269991	- - - - Plated or coated with zinc
72269999	- - - - Other
7227	Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.
72271000	- Of high speed steel
72272000	- Of silico-manganese steel
72279000	- Other
7228	Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel.
722810	- Bars and rods, of high speed steel:
72281010	- - Of circular cross-section
72281090	- - Other
722820	- Bars and rods, of silico-manganese steel:
	- - Of circular cross-section:
72282011	- - - Not further worked than hot-rolled, hot-drawn or extruded
72282019	- - - Other
	- - Other:
72282091	- - - Not further worked than hot-rolled, hot-drawn or extruded
72282099	- - - Other
722830	- Other bars and rods, not further worked than hot- rolled, hot-drawn or extruded:
72283010	- - Of circular cross-section
72283090	- - Other
722840	- Other bars and rods, not further worked than forged:
72284010	- - Of circular cross-section
72284090	- - Other
722850	- Other bars and rods, not further worked than cold-formed or cold-finished:
72285010	- - Of circular cross-section
72285090	- - Other
722860	- Other bars and rods:
72286010	- - Of circular cross-section
72286090	- - Other
722870	- Angles, shapes and sections:
72287010	- - Not further worked than hot-rolled, hot-drawn or extruded
72287090	- - Other
722880	- Hollow drill bars and rods:
	- - Containing by weight 0.6 % or more of carbon:
72288011	- - - Of circular cross-section
72288019	- - - Other
72288090	- - Other
7229	Wire of other alloy steel.
72292000	- Of silico-manganese steel
722990	- Other:
72299020	- - Of cross-section not exceeding 5.5 mm
72299030	- - Other, of high speed steel
	- - Other:
72299091	- - - Containing by weight 0.5 % or more of chromium
72299099	- - - Other