Chapter 39
  PLASTICS AND ARTICLES THEREOF
  Notes.
  1. Throughout the Nomenclature the expression “plastics” means those materials of headings 39.01 to 39.14 which are or have been capable, either at the moment of polymerisation or at some subsequent stage, of being formed under external influence (usually heat and pressure, if necessary with a solvent or plasticiser) by moulding, casting, extruding, rolling or other process into shapes which are retained on the removal of the external influence.
  Throughout the Nomenclature any reference to “plastics” also includes vulcanised fibre.The expression, however, does not apply to materials regarded as textile materials of Section XI.
  2. This Chapter does not cover:
  (a) Lubricating preparations of heading 27.10 or 34.03;
  (b) Waxes of heading 27.12 or 34.04;
  (c) Separate chemically defined organic compounds (Chapter 29);
  (d) Heparin or its salts (heading 30.01);
  (e) Solutions (other than collodions) consisting of any of the products specified in headings 39.01 to 39.13 in volatile organic solvents when the weight of the solvent exceeds 50 % of the weight of the solution (heading 32.08); stamping foils of heading 32.12;
  (f) Organic surface-active agents or preparations of heading 34.02;
  (g) Run gums or ester gums (heading 38.06);
  (h) Prepared additives for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils (heading 38.11);
  (ij) Prepared hydraulic fluids based on polyglycols, silicones or other polymers of Chapter 39 (heading 38.19);
  (k) Diagnostic or laboratory reagents on a backing of plastics (heading 38.22);
  (l) Synthetic rubber, as defined for the purposes of Chapter 40, or articles thereof;
  (m) Saddlery or harness (heading 42.01) or trunks, suitcases, handbags or other containers of heading 42.02;
  (n) Plaits, wickerwork or other articles of Chapter 46;
  (o) Wall coverings of heading 48.14;
  (p) Goods of Section XI (textiles and textile articles);
  (q) Articles of Section XII (for example, footwear, headgear, umbrellas, sun umbrellas, walking-sticks, whips, riding-crops or parts thereof);
  (r) Imitation jewellery of heading 71.17;
  (s) Articles of Section XVI (machines and mechanical or electrical appliances);
  (t) Parts of aircraft or vehicles of Section XVII;
  (u) Articles of Chapter 90 (for example, optical elements, spectacle frames, drawing instruments);
  (v) Articles of Chapter 91 (for example, clock or watch cases);
  (w) Articles of Chapter 92 (for example, musical instruments or parts thereof);
  (x) Articles of Chapter 94 (for example, furniture, lamps and lighting fittings, illuminated signs, prefabricated buildings);
  (y) Articles of Chapter 95 (for example, toys, games, sports requisites); or
  (z) Articles of Chapter 96 (for example, brushes, buttons, slide fasteners, combs, mouthpieces or stems for smoking pipes, cigarette-holders or the like, parts of vacuum flasks or the like, pens, propelling pencils, and monopods, bipods, tripods and similar articles).
  3. Headings 39.01 to 39.11 apply only to goods of a kind produced by chemical synthesis, falling in the following categories:
  (a) Liquid synthetic polyolefins of which less than 60 % by volume distils at 300oC, after conversion to 1,013 millibars when a reduced- pressure distillation method is used (headings 39.01 and 39.02);
  (b) Resins, not highly polymerised, of the coumarone-indene type (heading 39.11);
  (c) Other synthetic polymers with an average of at least 5 monomer units;
  (d) Silicones (heading 39.10);
  (e) Resols (heading 39.09) and other prepolymers.
  4. The expression “copolymers” covers all polymers in which no single monomer unit contributes 95 % or more by weight to the total polymer content.
  For the purposes of this Chapter, except where the context otherwise requires, copolymers (including co-polycondensates, co-polyaddition products, block copolymers and graft copolymers) and polymer blends are to be classified in the heading covering polymers of that comonomer unit which predominates by weight over every other single comonomer unit. For the purposes of this Note, constituent comonomer units of polymers falling in the same heading shall be taken together.
  If no single comonomer unit predominates, copolymers or polymer blends, as the case may be, are to be classified in the heading which occurs last in numerical order among those which equally merit consideration.
  5. Chemically modified polymers, that is those in which only appendages to the main polymer chain have been changed by chemical reaction, are to be classified in the heading appropriate to the unmodified polymer. This provision does not apply to graft copolymers.
  6. In headings 39.01 to 39.14, the expression “primary forms” applies only to the following forms:
  (a) Liquids and pastes, including dispersions (emulsions and suspensions) and solutions;
  (b) Blocks of irregular shape, lumps, powders (including moulding powders), granules, flakes and similar bulk forms.
  7. Heading 39.15 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 39.01 to 39.14).
  8. For the purposes of heading 39.17, the expression “tubes, pipes and hoses” means hollow products, whether semi-manufactures or finished products, of a kind generally used for conveying, conducting or distributing gases or liquids (for example, ribbed garden hose, perforated tubes). This expression also includes sausage casings and other lay-flat tubing. However, except for the last- mentioned, those having an internal cross-section other than round, oval, rectangular (in which the length does not exceed 1.5 times the width) or in the shape of a regular polygon are not to be regarded as tubes, pipes and hoses but as profile shapes.
  9. For the purposes of heading 39.18, the expression “wall or ceiling coverings of plastics” applies to products in rolls, of a width not less than 45 cm, suitable for wall or ceiling decoration, consisting of plastics fixed permanently on a backing of any material other than paper, the layer of plastics (on the face side) being grained, embossed, coloured, design-printed or otherwise decorated.
  10. In headings 39.20 and 39.21, the expression “plates, sheets, film, foil and strip” applies only to plates, sheets, film, foil and strip (other than those of Chapter 54) and to blocks of regular geometric shape, whether or not printed or otherwise surface- worked, uncut or cut into rectangles (including squares) but not further worked (even if when so cut they become articles ready for use).
  11. Heading 39.25 applies only to the following articles, not being products covered by any of the earlier headings of sub-Chapter II:
  (a) Reservoirs, tanks (including septic tanks), vats and similar containers, of a capacity exceeding 300 l;
  (b) Structural elements used, for example, in floors, walls or partitions, ceilings or roofs;
  (c) Gutters and fittings therefor;
  (d) Doors, windows and their frames and thresholds for doors;
  (e) Balconies, balustrades, fencing, gates and similar barriers;
  (f) Shutters, blinds (including Venetian blinds) and similar articles and parts and fittings thereof;
  (g) Large-scale shelving for assembly and permanent installation, for example, in shops, workshops, warehouses;
  (h) Ornamental architectural features, for example, flutings, cupolas, dovecotes; and
  (ij) Fittings and mountings intended for permanent installation in or on doors, windows, staircases, walls or other parts of buildings, for example, knobs, handles, hooks, brackets, towel rails, switch-plates and other protective plates.
  Subheading Notes.
  1. Within any one heading of this Chapter, polymers (including copolymers) and chemically modified polymers are to be classified according to the following provisions:
  (a) Where there is a subheading named “Other” in the same series:
  (1) The designation in a subheading of a polymer by the prefix “poly” (for example, polyethylene and polyamide-6,6) means that the constituent monomer unit or monomer units of the named polymer taken together must contribute 95 % or more by weight of the total polymer content.
  (2) The copolymers named in subheadings 3901.30, 3901.40, 3903.20, 3903.30 and 3904.30 are to be classified in those subheadings, provided that the comonomer units of the named copolymers contribute 95 % or more by weight of the total polymer content.
  (3) Chemically modified polymers are to be classified in the subheading named “Other”, provided that the chemically modified polymers are not more specifically covered by another subheading.
  (4) Polymers not meeting (1), (2) or (3) above, are to be classified in the subheading, among the remaining subheadings in the series, covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series of subheadings under consideration are to be compared.
  (b) Where there is no subheading named “Other” in the same series:
  (1) Polymers are to be classified in the subheading covering polymers of that monomer unit which predominates by weight over every other single comonomer unit. For this purpose, constituent monomer units of polymers falling in the same subheading shall be taken together. Only the constituent comonomer units of the polymers in the series under consideration are to be compared.
  (2) Chemically modified polymers are to be classified in the subheading appropriate to the unmodified polymer.
  Polymer blends are to be classified in the same subheading as polymers of the same monomer units in the same proportions.
  2. For the purposes of subheading 3920.43, the term “plasticisers” includes secondary plasticisers.
  Sub-Chapter I
  PRIMARY FORMS
HS code Product description in English
3901 Polymers of ethylene, in primary forms.
390110 - Polyethylene having a specific gravity of less than 0.94:
  - - In the form of liquids or pastes:
39011012 - - - Linear Low-Density Polyethylene (LLDPE)
39011019 - - - Other
  - - Other:
39011092 - - - Linear Low-Density Polyethylene (LLDPE)
39011099 - - - Other
39012000 - Polyethylene having a specific gravity of 0.94 or more
39013000 - Ethylene-vinyl acetate copolymers
39014000 - Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0.94
390190 - Other:
39019040 - - In dispersion
39019090 - - Other
3902 Polymers of propylene or of other olefins, in primary forms.
390210 - Polypropylene:
39021030 - - In dispersion
39021040 - - Granules, pellets, beads, flakes, chips and similar forms
39021090 - - Other
39022000 - Polyisobutylene
390230 - Propylene copolymers:
39023030 - - In the form of liquids or pastes
39023090 - - Other
390290 - Other:
39029010 - - Chlorinated polypropylene of a kind suitable for use in printing ink formulation
39029090 - - Other
3903 Polymers of styrene, in primary forms.
  - Polystyrene:
390311 - - Expansible:
39031110 - - - In the form of granules
39031190 - - - Other
390319 - - Other:
39031910 - - - In dispersion
39031920 - - - Granules, pellets, beads, flakes, chips and similar forms
39031990 - - - Other
390320 - Styrene-acrylonitrile (SAN) copolymers:
39032040 - - In aqueous dispersion
39032050 - - In non-aqueous dispersion
39032090 - - Other
390330 - Acrylonitrile-butadiene-styrene (ABS) copolymers:
39033040 - - In aqueous dispersion
39033050 - - In non-aqueous dispersion
39033060 - - In the form of granules
39033090 - - Other
390390 - Other:
39039030 - - In dispersion
  - - Other:
39039091 - - - Impact Polystyrene of notched izod impact at 23oC less than 80 J/m
39039099 - - - Other
3904 Polymers of vinyl chloride or of other halogenated olefins, in primary forms.
390410 - Poly(vinyl chloride), not mixed with any other substances:
39041010 - - Homopolymers, suspension type
  - - Other:
39041091 - - - In the form of granules
39041092 - - - In the form of powder
39041099 - - - Other
  - Other poly(vinyl chloride):
390421 - - Non-plasticised:
39042110 - - - In the form of granules
39042120 - - - In the form of powder
39042190 - - - Other
390422 - - Plasticised:
39042210 - - - In dispersion
39042220 - - - In the form of granules
39042230 - - - In the form of powder
39042290 - - - Other
390430 - Vinyl chloride-vinyl acetate copolymers:
39043010 - - In the form of granules
39043020 - - In the form of powder
39043090 - - Other
390440 - Other vinyl chloride copolymers:
39044010 - - In the form of granules
39044020 - - In the form of powder
39044090 - - Other
390450 - Vinylidene chloride polymers:
39045040 - - In dispersion
39045050 - - In the form of granules
39045060 - - In the form of powder
39045090 - - Other
  - Fluoro-polymers:
390461 - - Polytetrafluoroethylene:
39046110 - - - In the form of granules
39046120 - - - In the form of powder
39046190 - - - Other
390469 - - Other:
39046930 - - - In dispersion
39046940 - - - In the form of granules
39046950 - - - In the form of powder
39046990 - - - Other
390490 - Other:
39049030 - - In dispersion
39049040 - - In the form of granules
39049050 - - In the form of powder
39049090 - - Other
3905 Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms.
  - Poly(vinyl acetate):
39051200 - - In aqueous dispersion
390519 - - Other:
39051910 - - - In the form of liquids or pastes
39051990 - - - Other
  - Vinyl acetate copolymers:
39052100 - - In aqueous dispersion
39052900 - - Other
390530 - Poly(vinyl alcohol), whether or not containing unhydrolysed acetate groups:
39053010 - - In dispersion
39053090 - - Other
  - Other:
390591 - - Copolymers:
39059110 - - - In dispersion
39059190 - - - Other
390599 - - Other:
39059910 - - - In aqueous dispersion
39059920 - - - In non-aqueous dispersion
39059990 - - - Other
3906 Acrylic polymers in primary forms.
390610 - Poly(methyl methacrylate):
39061010 - - In dispersion
39061090 - - Other
390690 - Other:
39069020 - - In dispersion
  - - Other:
39069092 - - - Sodium polyacrylate
39069099 - - - Other
3907 Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallyl esters and other polyesters, in primary forms.
39071000 - Polyacetals
390720 - Other polyethers:
39072010 - - Polytetramethylene ether glycol
39072090 - - Other
390730 - Epoxide resins:
39073020 - - Of a kind used for coating, in powder form
39073030 - - In the form of liquids or pastes
39073090 - - Other
39074000 - Polycarbonates
390750 - Alkyd resins:
39075010 - - In the form of liquids or pastes
39075090 - - Other
  - Poly(ethylene terephthalate):
39076100 - - Having a viscosity number of 78 ml/g or higher
390769 - - Other:
39076910 - - - In the form of granules
39076990 - - - Other
39077000 - Poly(lactic acid)
  - Other polyesters:
390791 - - Unsaturated:
39079120 - - - Granules and similar forms
39079130 - - - In the form of liquids or pastes
39079190 - - - Other
390799 - - Other:
39079940 - - - Of a kind used for coating, in powder form
39079990 - - - Other
3908 Polyamides in primary forms.
390810 - Polyamide-6, -11, -12, -6,6, -6,9, -6,10 or -6,12:
39081010 - - Polyamide-6
39081090 - - Other
39089000 - Other
3909 Amino-resins, phenolic resins and polyurethanes, in primary forms.
390910 - Urea resins; thiourea resins:
39091010 - - Moulding compounds
39091090 - - Other
390920 - Melamine resins:
39092010 - - Moulding compounds
39092090 - - Other
  - Other amino-resins:
39093100 - - Poly(methylene phenyl isocyanate) (crude MDI, polymeric MDI)
  - - Other:
39093910 - - - Moulding compounds
  - - - Other:
39093991 - - - - Glyoxal monourein resin
39093999 - - - - Other
390940 - Phenolic resins:
39094010 - - Moulding compounds other than phenol formaldehyde
39094090 - - Other
39095000 - Polyurethanes
3910 Silicones in primary forms.
39100020 - In dispersion and in solutions
39100090 - Other
3911 Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in Note 3 to this Chapter, not elsewhere specified or included, in primary forms.
39111000 - Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes
39119000 - Other
3912 Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms.
  - Cellulose acetates:
39121100 - - Non-plasticised
39121200 - - Plasticised
391220 - Cellulose nitrates (including collodions):
  - - Non-plasticised:
39122011 - - - Water-based semi-finished nitrocellulose
39122019 - - - Other
39122020 - - Plasticised
  - Cellulose ethers:
39123100 - - Carboxymethylcellulose and its salts
39123900 - - Other
391290 - Other:
39129020 - - In the form of granules
39129090 - - Other
3913 Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms.
39131000 - Alginic acid, its salts and esters
391390 - Other:
39139010 - - Hardened proteins
39139020 - - Chemical derivatives of natural rubber
39139030 - - Starch-based polymers
39139090 - - Other
39140000 Ion-exchangers based on polymers of headings 39.01 to 39.13, in primary forms.
  Sub-Chapter II
  WASTE, PARINGS AND SCRAP; SEMI- MANUFACTURES; ARTICLES
3915 Waste, parings and scrap, of plastics.
391510 - Of polymers of ethylene:
39151010 - - Of non-rigid cellular products
39151090 - - Other
391520 - Of polymers of styrene:
39152010 - - Of non-rigid cellular products
39152090 - - Other
391530 - Of polymers of vinyl chloride:
39153010 - - Of non-rigid cellular products
39153090 - - Other
39159000 - Of other plastics
3916 Monofilament of which any cross-sectional dimension exceeds 1 mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics.
391610 - Of polymers of ethylene:
39161010 - - Monofilament
39161020 - - Rods, sticks and profile shapes
391620 - Of polymers of vinyl chloride:
39162010 - - Monofilament
39162020 - - Rods, sticks and profile shapes
391690 - Of other plastics:
  - - Of hardened proteins:
39169041 - - - Monofilament
39169042 - - - Rods, sticks and profile shapes
39169050 - - Of vulcanised fibre
39169060 - - Of chemical derivatives of natural rubber
39169070 - - Of other addition polymerisation products; of regenerated cellulose; of cellulose nitrate, cellulose acetate and other cellulose esters, cellulose ethers and other chemical derivatives of cellulose, plasticised
39169080 - - Of condensation or rearrangement polymerisation products
  - - Other:
39169091 - - - Monofilament
39169092 - - - Rods, sticks and profile shapes
3917 Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics.
391710 - Artificial guts (sausage casings) of hardened protein or of cellulosic materials:
39171010 - - Of hardened proteins
39171090 - - Other
  - Tubes, pipes and hoses, rigid:
39172100 - - Of polymers of ethylene
39172200 - - Of polymers of propylene
39172300 - - Of polymers of vinyl chloride
391729 - - Of other plastics:
  - - - Further worked than merely surface worked:
39172911 - - - - Of other addition polymerisation products
39172912 - - - - Of amino-resins; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised; of vulcanised fibre; of hardened proteins; of chemical derivatives of natural rubber
39172919 - - - - Other
  - - - Other:
39172921 - - - - Of other addition polymerisation products
39172922 - - - - Of phenolic resins
39172923 - - - - Of amino-resins; of hardened proteins; of chemical derivatives of natural rubber
39172924 - - - - Of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised; of vulcanised fibre
39172925 - - - - Of other condensation or rearrangement polymerisation products
39172929 - - - - Other
  - Other tubes, pipes and hoses:
391731 - - Flexible tubes, pipes and hoses, having a minimum burst pressure of 27.6 MPa:
  - - - Further worked than merely surface worked:
39173111 - - - - Of addition polymerisation products
39173112 - - - - Of amino-resins; of phenolic resins; of vulcanised fibre; of chemical derivatives of natural rubber
39173119 - - - - Other
  - - - Other:
39173121 - - - - Of addition polymerisation product
39173123 - - - - Of amino-resins; of phenolic resins; of chemical derivatives of natural rubber
39173124 - - - - Of vulcanised fibre
39173125 - - - - Of other condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
39173129 - - - - Other
391732 - - Other, not reinforced or otherwise combined with other materials, without fittings:
39173210 - - - Sausage or ham casings
39173220 - - - Thermoplastic hoses for gas stove
  - - - Other:
  - - - - Further worked than merely surface worked:
39173291 - - - - - Of addition polymerisation products; of phenolic resins or amino resins; of chemical derivatives of natural rubber
39173292 - - - - - Other
  - - - - Other:
39173293 - - - - - Of addition polymerisation products
39173294 - - - - - Of amino-resins or phenolic resins; of chemical derivatives of natural rubber
39173295 - - - - - Of other condensation or rearrangement polymerisation products; of vulcanised fibre; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
39173299 - - - - - Other
391733 - - Other, not reinforced or otherwise combined with other materials, with fittings:
39173310 - - - Other, further worked than merely surface worked
  - - - Other:
39173391 - - - - Of other addition polymerisation products
39173392 - - - - Of condensation or rearrangement polymerisation products
39173393 - - - - Of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
39173394 - - - - Of vulcanised fibre
39173395 - - - - Of hardened proteins
39173396 - - - - Of chemical derivatives of natural rubber
39173399 - - - - Other
391739 - - Other:
  - - - Further worked than merely surface worked:
39173911 - - - - Of addition polymerisation products; of vulcanised fibre
39173912 - - - - Of phenolic resins or amino resins; of chemical derivatives of natural rubber
39173913 - - - - Of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
39173919 - - - - Other
  - - - Other:
39173991 - - - - Of addition polymerisation products; of vulcanised fibre
39173992 - - - - Of phenolic resins or amino resins; of chemical derivatives of natural rubber
39173993 - - - - Of other condensation or rearrangement polymerisation products
39173994 - - - - Of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
39173999 - - - - Other
39174000 - Fittings
3918 Floor coverings of plastics, whether or not self- adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in Note 9 to this Chapter.
391810 - Of polymers of vinyl chloride:
  - - Floor coverings:
39181011 - - - Tiles
39181019 - - - Other
39181090 - - Other
391890 - Of other plastics:
  - - Floor coverings:
39189011 - - - Tiles, of polyethylene
39189013 - - - Other, of polyethylene
39189014 - - - Of chemical derivatives of natural rubber
39189015 - - - Of other addition polymerisation products; of condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetate or other chemical derivatives of cellulose, plasticised
39189016 - - - Of vulcanised fibre
39189019 - - - Other
  - - Other:
39189091 - - - Of polyethylene
39189092 - - - Of chemical derivatives of natural rubber
39189093 - - - Of other addition polymerisation products; of condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetate or other chemical derivatives of cellulose, plasticised
39189094 - - - Of vulcanised fibre
39189099 - - - Other
3919 Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls.
391910 - In rolls of a width not exceeding 20 cm:
39191010 - - Of polymers of vinyl chloride
39191020 - - Of polyethylene
  - - Other:
39191091 - - - Of hardened proteins or chemical derivatives of natural rubber
39191092 - - - Of addition polymerisation products; of condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
39191099 - - - Other
391990 - Other:
39199010 - - Of polymers of vinyl chloride
39199020 - - Of hardened proteins
  - - Other:
39199091 - - - Of chemical derivatives of natural rubber
39199092 - - - Of addition polymerisation products; of condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised
39199099 - - - Other
3920 Other plates, sheets, film, foil and strip, of plastics, non- cellular and not reinforced, laminated, supported or similarly combined with other materials.
392010 - Of polymers of ethylene:
  - - Plates and sheets:
39201011 - - - Rigid
39201019 - - - Other
39201090 - - Other
392020 - Of polymers of propylene:
39202010 - - Biaxially oriented polypropylene (BOPP) film
  - - Other:
39202091 - - - Plates and sheets
39202099 - - - Other
392030 - Of polymers of styrene:
39203020 - - Acrylonitrile butadiene styrene (ABS) sheets of a kind used in the manufacture of refrigerators
  - - Other:
39203091 - - - Plates and sheets, rigid
39203092 - - - Other, plates and sheets
39203099 - - - Other
  - Of polymers of vinyl chloride:
392043 - - Containing by weight not less than 6 % of plasticisers:
39204310 - - - Plates and sheets
39204390 - - - Other
39204900 - - Other
  - Of acrylic polymers:
392051 - - Of poly(methyl methacrylate):
  - - - Plates and sheets:
39205111 - - - - Rigid
39205119 - - - - Other
39205190 - - - Other
392059 - - Other:
  - - - Plates and sheets:
39205911 - - - - Rigid
39205919 - - - - Other
39205990 - - - Other
  - Of polycarbonates, alkyd resins, polyallyl esters or other polyesters:
392061 - - Of polycarbonates:
39206110 - - - Plates and sheets
39206190 - - - Other
392062 - - Of poly(ethylene terephthalate):
39206210 - - - Plates and sheets
39206290 - - - Other
392063 - - Of unsaturated polyesters:
39206310 - - - Plates and sheets
39206390 - - - Other
392069 - - Of other polyesters:
39206910 - - - Plates and sheets
39206990 - - - Other
  - Of cellulose or its chemical derivatives:
392071 - - Of regenerated cellulose:
39207110 - - - Cellophane film
  - - - Other:
39207191 - - - - Printed sheets
39207199 - - - - Other
39207300 - - Of cellulose acetate
392079 - - Of other cellulose derivatives:
39207910 - - - Of nitrocellulose (gun cotton)
39207920 - - - Of vulcanised fibre
  - - - Other:
39207991 - - - - Plates and sheets
39207999 - - - - Other
  - Of other plastics:
392091 - - Of poly(vinyl butyral):
39209110 - - - Film of a kind used in safety glass, of a thickness exceeding 0.38 mm but not exceeding 0.76 mm, and of a width not exceeding 2 m
  - - - Other:
39209191 - - - - Plates and sheets
39209199 - - - - Other
392092 - - Of polyamides:
39209210 - - - Of polyamide-6
  - - - Other:
39209291 - - - - Plates and sheets
39209299 - - - - Other
392093 - - Of amino-resins:
39209310 - - - Plates and sheets
39209390 - - - Other
392094 - - Of phenolic resins:
39209410 - - - Phenol formaldehyde (bakelite) sheets
  - - - Other:
39209491 - - - - Plates and sheets
39209499 - - - - Other
392099 - - Of other plastics:
39209910 - - - Of hardened proteins; of chemical derivatives of natural rubber
  - - - Of addition polymerisation products:
39209921 - - - - Plates and sheets
39209929 - - - - Other
  - - - Of condensation or rearrangement polymerisation products:
39209931 - - - - Plates and sheets
39209939 - - - - Other
39209990 - - - Other
3921 Other plates, sheets, film, foil and strip, of plastics.
  - Cellular:
392111 - - Of polymers of styrene:
39211120 - - - Rigid
  - - - Other:
39211191 - - - - Plates and sheets
39211192 - - - - Film
39211199 - - - - Other
39211200 - - Of polymers of vinyl chloride
392113 - - Of polyurethanes:
39211310 - - - Rigid
  - - - Other:
39211391 - - - - Plates and sheets
39211392 - - - - Film
39211399 - - - - Other
392114 - - Of regenerated cellulose:
39211420 - - - Rigid
  - - - Other:
39211491 - - - - Plates and sheets
39211492 - - - - Film
39211499 - - - - Other
392119 - - Of other plastics:
39211920 - - - Rigid
  - - - Other:
39211991 - - - - Plates and sheets
39211992 - - - - Film
39211999 - - - - Other
392190 - Other:
39219010 - - Of vulcanised fibre
39219020 - - Of hardened proteins
39219030 - - Of chemical derivatives of natural rubber
  - - Of condensation or rearrangement polymerisation products:
39219041 - - - Plates and sheets
39219042 - - - Film
39219043 - - - Textile laminated strip
39219049 - - - Other
39219050 - - Of regenerated cellulose
39219060 - - Of other cellulose or its chemical derivatives
39219090 - - Other
3922 Baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics.
392210 - Baths, shower-baths, sinks and wash-basins:
  - - Baths:
39221011 - - - Bathtubs having rectangular or oblong interior shape
39221019 - - - Other
39221090 - - Other
39222000 - Lavatory seats and covers
392290 - Other:
  - - Lavatory pans, flushing cisterns and urinals:
39229011 - - - Parts of flushing cisterns
39229012 - - - Flushing cisterns equipped with their mechanisms
39229019 - - - Other
39229090 - - Other
3923 Articles for the conveyance or packing of goods, of plastics; stoppers, lids, caps and other closures, of plastics.
392310 - Boxes, cases, crates and similar articles:
39231010 - - Cases for film, tape and optical discs
39231090 - - Other
  - Sacks and bags (including cones):
392321 - - Of polymers of ethylene:
  - - - Aseptic bags reinforced with aluminium foil (other than retort pouches):
39232111 - - - - Of a width of 315 mm or more and of a length of 410 mm or more, incorporating a sealed gland
39232119 - - - - Other
  - - - Other:
39232191 - - - - Aseptic bags not reinforced with aluminium foil (other than retort pouches), of a width of 315 mm or more and of a length of 410 mm or more, incorporating a sealed gland
39232199 - - - - Other
392329 - - Of other plastics:
39232910 - - - Aseptic bags whether or not reinforced with aluminium foil (other than retort pouches), of a width of 315 mm or more and of a length of 410 mm or more, incorporating a sealed gland
39232990 - - - Other
392330 - Carboys, bottles, flasks and similar articles:
39233020 - - Multi-layer fibreglass reinforced containers, for compressed or liquefied gas
39233090 - - Other
392340 - Spools, cops, bobbins and similar supports:
39234010 - - Suitable for use with the machines of heading 84.44, 84.45 or 84.48
39234090 - - Other
39235000 - Stoppers, lids, caps and other closures
392390 - Other:
39239010 - - Toothpaste tubes
39239090 - - Other
3924 Tableware, kitchenware, other household articles and hygienic or toilet articles, of plastics.
392410 - Tableware and kitchenware:
39241010 - - Of melamine
39241090 - - Other
392490 - Other:
39249010 - - Bed pans, urinals (portable type) or chamber- pots
39249020 - - Nipple former, breastshells, nipple shields, hand expression funnel
39249030 - - Supplementary feeding system for babies
39249090 - - Other
3925 Builders’ ware of plastics, not elsewhere specified or included.
39251000 - Reservoirs, tanks, vats and similar containers, of a capacity exceeding 300 l
39252000 - Doors, windows and their frames and thresholds for doors
39253000 - Shutters, blinds (including Venetian blinds) and similar articles and parts thereof
39259000 - Other
3926 Other articles of plastics and articles of other materials of headings 39.01 to 39.14.
39261000 - Office or school supplies
392620 - Articles of apparel and clothing accessories (including gloves, mittens and mitts):
39262060 - - Articles of apparel used for protection from chemical substances, radiation or fire
39262090 - - Other
39263000 - Fittings for furniture, coachwork or the like
39264000 - Statuettes and other ornamental articles
392690 - Other:
39269010 - - Floats for fishing nets
39269020 - - Fans and handscreens, frames and handles therefor, and parts thereof
  - - Hygienic, medical and surgical articles:
39269032 - - - Plastic moulds with denture imprints
39269039 - - - Other
  - - Safety and protective devices:
39269041 - - - Police shields
39269042 - - - Protective masks for use in welding and similar work
39269044 - - - Life saving cushions for the protection of persons falling from heights
39269049 - - - Other
  - - Articles for industrial uses:
39269053 - - - Transmission or conveyor belts or belting
39269055 - - - Plastic J-hooks or bunch blocks for detonators
39269059 - - - Other
39269060 - - Poultry feeders
39269070 - - Padding for articles of apparel or clothing accessories
  - - Cards for jewellery or small objects of personal adornment; beads; shoe lasts:
39269081 - - - Shoe lasts
39269082 - - - Prayer beads
39269089 - - - Other
  - - Other:
39269091 - - - Of a kind used for grain storage
39269092 - - - Empty capsules of a kind suitable for pharmaceutical use
39269099 - - - Other